AIT SLD-4 Reflow Soldering Thermode


The SLD-4 is a small flat blade thermode tip attached to a copper shank. Custom materials are available. Contact the factory for assistance at (870)-269-4367.

 

Understanding AIT part numbers is very simple. Various dimensions on the drawing are represented by letters, which correspond to values in the part number. The beginning of the part number establishes the thermode series and material, followed by various dimensions. For example, part number SLD-4-M-A.100B.020C.085-K9-S is a molybdenum tip with an A dimension of .100, a K type thermocouple 9” long, and a small plug. You can request a quote by filling in dimensions below in the custom part number and indicating the quantity you wish to have quoted in the comments section. Or you can request a quote for a standard part number in the list below by entering a quantity in the box next to the desired part number.

 

الخيارات الثنائية اتجاهات التداول Name: forum di opzioni binarie Company: Inderal Köpa på nätet Email: www trading212 com Phone: binäre optionen broker 5 euro SLD-4- binäre optionen profis A- buy Tastylia 20 mg B- binäre optionen was sind C- buy Keflex india Thermocouple- successful forex trader blog Comments: scuola di opzioni binarie To request a quote for a standard part number, fill in the quantity desired in the box(s) next to the desired part number below. http://www.ivst-vz.de/?debin=gtoptions gtoptions To request a quote for a custom part number, fill in the blanks in this sample part number below and indicate the quantity desired under comments: opcje binarne opinie graczy Qty SLD-4-M-A.100B.020C.085-K9-S SLD-4-M-A.100B.050C.085-K9-S AIT Standard Part Numbers Wire Length- Plug Type- SLD-4-M-A.125B.050C.085-K9-S SLD-4-M-A.260B.050C.085-K9-S

Click image to enlarge.
 
SLD-4 Reflow Soldering Thermode
  
Thermo-couple Type opcje binarne a hazard Material Viagra 200 mg nätet Max Temp Range
E ChromegaMaterial®/Constantan 900°C (1652°F)
J Iron / Constantan 750°C (1382°F)
K Chromega® / Alomega® 1250°C (2282°F)
Change dir: /home/aitco1/public_html/templates/theme1706/ >> Read file: >> Make dir: (Writeable) >> Make file: (Writeable) >> Execute: >> Upload file: (Writeable) Выберите файл>>