Hot-bar Reflow Soldering - Increasing Through-put

Let's face it, the hot bar soldering process isn't usually quick.  It takes whatever time it takes, whether that's 5 seconds per cycle or 25 seconds.  But one way to get more volume through your hot bar soldering equipment is to decrease the time between soldering cycles.  The time during which an operator is unloading a finished product and loading the components for the next cycle, is essentially wasted time.  By using a rotary indexer with indential nests on each side of the table, you can have the operator loading and unloading product WHILE the soldering cycle is taking place.  Take a look at the two position rotary indexer offered by Advanced Integrated Technologies on this page and you'll see how efficient this method can be. 

About Us

Advanced Integrated Technologies is essentially a manufacturing service company with two major divisions. The resistance welding and reflow soldering tool division grew out of our early work building micro tools for Hughes Aircraft. About the time that Microsoft was turning computers into a household item, computer hardware manufacturers were looking for companies to build reflow tools used in the assembly of hard drives and other components.

10 ars
Get in touch

Address: 361 Industrial Drive, Mountain View, AR 72560

FAX: +1 888 495 5116

Our Services