The SLD-11 is a thermode originally designed for use on Miyachi Unitek reflow machines, but can be used on any system with an appropriate reflow head. Custom materials are available. Contact the factory for assistance at (870)-269-4367.

Understanding AIT part numbers is very simple. Various dimensions on the drawing are represented by letters, which correspond to values in the part number. The beginning of the part number establishes the thermode series and material, followed by various dimensions. For example, part number SLD-11-M-A.025B.030-J9-S is a Molybdenum thermode with an A dimension of .025”, a J type thermocouple 9” long, and a small phono plug. You can request a quote by filling in dimensions below in the custom part number and indicating the quantity you wish to have quoted in the comments section. Or you can request a quote for a standard part number in the list below by entering a quantity in the box next to the desired part number.

{sfg:62}

The SLD-10 is a thermode originally designed for use on Miyachi Unitek reflow machines, but can be used on any system with an appropriate reflow head. The AIT version of this thermode has been redesign at the tip for more even and consistent heating along the length of the thermode face, than what is available from the Miyachi thermodes. Custom materials are available. Contact the factory for assistance at (870)-269-4367.

Understanding AIT part numbers is very simple. Various dimensions on the drawing are represented by letters, which correspond to values in the part number. The beginning of the part number establishes the thermode series and material, followed by various dimensions. For example, part number SLD-10-M -A.400B.030-J9-O is a Molybdenum thermode with an A dimension of .400”, a J type thermocouple 9” long, and an Omega 2 prong plug. You can request a quote by filling in dimensions below in the custom part number and indicating the quantity you wish to have quoted in the comments section. Or you can request a quote for a standard part number in the list below by entering a quantity in the box next to the desired part number.

{sfg:61}

The SLD-9 is a thermode originally developed for use on Hughes reflow machines, but can be used on any system that will accept a .260 x .125 shank. Custom materials are available. Contact the factory for assistance at (870)-269-4367.

Understanding AIT part numbers is very simple. Various dimensions on the drawing are represented by letters, which correspond to values in the part number. The beginning of the part number establishes the thermode series and material, followed by various dimensions. For example, part number SLD-9-Hns-A.500B.050-E9-S is a Haynes thermode with an A dimension of .500”, an E type thermocouple 9” long, and a small phono plug. You can request a quote by filling in dimensions below in the custom part number and indicating the quantity you wish to have quoted in the comments section. Or you can request a quote for a standard part number in the list below by entering a quantity in the box next to the desired part number.

{sfg:60}

The SLD-8 is a thermode originally developed for use on Hughes reflow machines, but can be used on any system that will accept a .260 x .125 shank. Custom materials are available. Contact the factory for assistance at (870)-269-4367.

Understanding AIT part numbers is very simple. Various dimensions on the drawing are represented by letters, which correspond to values in the part number. The beginning of the part number establishes the thermode series and material, followed by various dimensions. For example, part number SLD-8-W-A.300B.050-E9-S is a tungsten thermode with an A dimension of .300”, an E type thermocouple 9” long, and a small phono plug. You can request a quote by filling in dimensions below in the custom part number and indicating the quantity you wish to have quoted in the comments section. Or you can request a quote for a standard part number in the list below by entering a quantity in the box next to the desired part number.

{sfg:59}

The SLD-7a is a thermode originally developed for use on Hughes reflow machines, but can be used on any system that will accept a .260 x .125 shank. SLD-7a part numbers below are cross referenced to Hughes part numbers. All dimensions are in inches. Tips are welded to a copper shank. Custom materials are available. Contact the factory for assistance at (870)-269-4367.

Understanding AIT part numbers is very simple. Various dimensions on the drawing are represented by letters, which correspond to values in the part number. The beginning of the part number establishes the thermode series and material, followed by various dimensions. For example, part number SLD-7a-M-A.032B.035C.062-E9-S is a molybdenum tip with an A dimension of .032”, an E type thermocouple 9” long, and a small phono plug. You can request a quote by filling in dimensions below in the custom part number and indicating the quantity you wish to have quoted in the comments section. Or you can request a quote for a standard part number in the list below by entering a quantity in the box next to the desired part number.

{sfg:58}

The SLD-7 is a thermode originally developed for use on Hughes reflow machines, but can be used on any system that will accept a .260 x .125 shank. SLD-7 part numbers below are cross referenced to Hughes part numbers. All dimensions are in inches. Tips are welded to a copper shank. Custom materials are available. Contact the factory for assistance at (870)-269-4367.

Understanding AIT part numbers is very simple. Various dimensions on the drawing are represented by letters, which correspond to values in the part number. The beginning of the part number establishes the thermode series and material, followed by various dimensions. For example, part number SLD-7-M-A.375B.03C.05-E9-S is a molybdenum tip with an A dimension of .375”, an E type thermocouple 9” long, and a small phono plug. You can request a quote by filling in dimensions below in the custom part number and indicating the quantity you wish to have quoted in the comments section. Or you can request a quote for a standard part number in the list below by entering a quantity in the box next to the desired part number.

{sfg:57}

The SLD-6 is a one piece flat blade thermode made for use on Avio reflow machines. SLD-6 part numbers below are cross referenced to Avio part numbers. All dimensions are in millimeters. Tips are available as round or rectangular. Quote forms and drawings for both styles are shown below. Custom materials are available. Contact the factory for assistance at (870)-269-4367.

Understanding AIT part numbers is very simple. Various dimensions on the drawing are represented by letters, which correspond to values in the part number. The beginning of the part number establishes the thermode series and material, followed by various dimensions. For example, part number SLD-6-M-A1.0B0.8C1.0-E9-L is a molybdenum tip with an A dimension of 1.0 mm, an E type thermocouple 9” long, and a large phono plug. You can request a quote by filling in dimensions below in the custom part number and indicating the quantity you wish to have quoted in the comments section. Or you can request a quote for a standard part number in the list below by entering a quantity in the box next to the desired part number.

 SLD-6 Square Tip

{sfg:55}

SLD-6 Round Tip

{sfg:56}

The SLD-5 is a fold tip thermode, made by welding a piece of folded inconnel to a copper alloy shank. Custom materials are available. Contact the factory for assistance at (870)-269-4367.

Understanding AIT part numbers is very simple. Various dimensions on the drawing are represented by letters, which correspond to values in the part number. The beginning of the part number establishes the thermode series and material, followed by various dimensions. For example, part number SLD-5-In-A.250B.075-J9-O is an Inconnel tip with an A dimension of .250, a J type thermocouple 9” long, and an Omega 2 prong plug. You can request a quote by filling in dimensions below in the custom part number and indicating the quantity you wish to have quoted in the comments section. Or you can request a quote for a standard part number in the list below by entering a quantity in the box next to the desired part number.

{sfg:54}

The SLD-4 is a small flat blade thermode tip attached to a copper shank. Custom materials are available. Contact the factory for assistance at (870)-269-4367.

Understanding AIT part numbers is very simple. Various dimensions on the drawing are represented by letters, which correspond to values in the part number. The beginning of the part number establishes the thermode series and material, followed by various dimensions. For example, part number SLD-4-M-A.100B.020C.085-K9-S is a molybdenum tip with an A dimension of .100, a K type thermocouple 9” long, and a small plug. You can request a quote by filling in dimensions below in the custom part number and indicating the quantity you wish to have quoted in the comments section. Or you can request a quote for a standard part number in the list below by entering a quantity in the box next to the desired part number.

{sfg:53}

The SLD-3 is a small round peg tip attached to a copper shank.  This thermode is a direct replacement for the Unitek 17P series thermodes.  Custom materials are available. Contact the factory for assistance at (870)-269-4367.

Understanding AIT part numbers is very simple.  Various dimensions on the drawing are represented by letters, which correspond to values in the part number.  The beginning of the part number establishes the thermode series and material, followed by various dimensions. For example, part number SLD-3-W-C.070D.040E.060-J9-O is a tungsten tip with a D dimension of .040, a J type thermocouple 9” long, and an Omega two prong plug.  You can request a quote by filling in dimensions below in the custom part number and indicating the quantity you wish to have quoted in the comments section.  Or you can request a quote for a standard part number in the list below by entering a quantity in the box next to the desired part number.

{sfg:70}