TCW-415 Hot Bar Soldering Power Supply
TCW-415 Pulse Heat Power Supply Suitable for Soldering, Thermo-Compression Bonding and Heat-Fusing!
Pulse Heat Power Supply
Next Generation Type
TCW-415
- High Reliability Joining: Becuause heating and cooling take place while the pressure is being applied, the work position will not be shifted during joining.
- Variable Temperature Profile: Because the heating is local and instantaneous, thermal impact to the peripheral components is restrained.
- High Reprodicibility: Digital PID control enables good reproducitbility of temperature and time. As a result, no skill of the operator is required.
- Pb Free Compatible: Pb free solder is accomodated by setting to high temperature and long heating time.
- User Interface: RS-232C&I/O is standard equipped, making the unit easy to be connected to external equipment such as incorporationg into an automated system.
- Ample Monitoring Functions: Temperature Monitoring: Upper and Lower limit (average peak), Profile Detection Error: Over-Heat, Thermocouple Disconnection, etc.
- Other Standard Functions: Number of stored settings: 15, Head vertical and cooling air control signal, Auxiliary thermocouple input, Counter function.
New TCW-415 Next Generation Features
For soldering of micro electronic components and cables.
Stable Joining Quality
Achieves precise temperature control through feedback from the joining tool temperature, helping deliver highly reliable joining quality.
Reliable Traceability
Supports quality control by providing output of joining profiles, making production results easier to monitor and verify.
Heat Shift Function
The new Heat Shift Function can shift control settings based on temperature and other joining workpiece factors. This helps reduce thermal impact to workpieces and stabilizes the pre-heat temperature.
Additional Enhancements
- After-heat function: Improves the release properties of resin caulking.
- External signal trigger conditions: Helps ensure consistent quality.
- Current value display function: Supports calculation of power consumption.
- Four-stage heat control: Provides more flexible heat control.
- Temperature waveform plotting: Plots the waveform until cooling is complete.
Items |
TCW-415 |
| Power Source | Single phase AC200V~230V±10% 15A (Option: AC100 - 115V) ※ |
| Transformer Rated Capacity | Built-in, 750VA |
| Transformer Secondary Voltage | 0.88V, 1.24V, 1.75V, 2.47V, 3.5V |
| Heating Temperature | Room temperature ~ 600°C, 1°C step |
| Thermocouple Type | E, J or K type |
| Heating Time | 0.01-99.99sec |
| Display Screen | 5.7" color LCD |
| Heat Control | 4 steps |
| Heat Setting Recipes | 255 |
| Monitor Function | Temperature from main and auxiliary thermocouple |
| Heat Shift Function | Yes |
| Interface | RS-232C, I/O |
| External Dimensions | W200×D320×H283mm |
| Weight | Approx. 20kg |
| Operating Temp. | 0 to 45°C |
| Operating Humidity | 35~85%RH (No condensation) |
| Operating Ambient Temp. | Free from corrosive gases |
| Storage Ambient Temp. | -10°C to 60°C |
※ Factory option
Reflow Head
Select a head having a force suitable to the object to be joined and suitable to the heater tip/heater tool to be used.
Heater Tip Type
Heater Tool Type
Heater Tip/Heater Tool
Select the size and shape suitable to the object to be joined. If necessary, it can be machined for custom shape. A material to which the solder will not stick, easy to heat, and with a high resistance value is used.
Heater Tip
Heater tool
About Us
Advanced Integrated Technologies is essentially a manufacturing service company with two major divisions. The resistance welding and reflow soldering tool division grew out of our early work building micro tools for Hughes Aircraft. About the time that Microsoft was turning computers into a household item, computer hardware manufacturers were looking for companies to build reflow tools used in the assembly of hard drives and other components.
Get in touch
Address: 361 Industrial Drive, Mountain View, AR 72560
FAX: +1 888 495 5116